Mg Schütze Reg.Norge

This is a project I wanted to do for many years, and finally I braved up and started it. I saw a photo in W.Tieke`s book "Tragödie um die Treue" and it show a soldier from the Waffen SS sitting in his machinegun position behind a log wall. The mg is mounted on a tripod and it is a large heap of spent ammo shells beneath it.

Surrounding the soldier and the tripod is several ammo boxes and spare barrel containers.

The text below the photo explains it to be a foreign volunteer fighting on the Narva front in Estonia. South of Narva it is a marshy terrain and impossible to make traditional trenches so the soldiers built wooden palisades to protect from the enemy. I wouldn`t try to copy the photo 100%, but hoping to get something pretty close to it, in scale 1/35.

To begin with I went through my spares boxes picking out anything that could be used, which turned out to be the ammo boxes and spare barrel containers. The figure I chose to use came from one of the crew in Dragons Sd.Kfz.7 8t Halftrack kit (6545) and the tripod from Dragons Mg42 Heavy Machine Gun Team. After some speculation on what to use as a base I stacked a few plastic lids from choco-drink boxes, which my ex-girlfriend was hooked on, on top each other and super glued them together. This gave me a perfect sized and shaped base to work with.

With a new scalpel blade I cut a slit-trench into the base and also cut some lines criss-crossing the plastic lid to help the groundwork stick to it. Next up I smeared a layer of PVA glue on, put a sheet of Oasis foam (florists foam) on top the glue and then poured some thinned PVA over the foam. I let this soak a few minutes before I "stabbed" it in place with the backside of a pencil and then put it aside to cure. In the garden I collected a bunch of twigs I could use for the log protective wall. These were microwaved to get rid of any moisture and bugs and then stuck together with some superglue.

If I had dared I would alter the figure to the exact pose in the photo, but as I have never tried any re-sculpting before I leave that for a future project. Anyway I think the Dragon figure I chose to use has a very good pose and is nicely cast. He looks tired and doesn`t have any belts or webbings just like the guy in the picture. After scraping away the mould lines I try to re-scribe and sharpen some of the details like the seams, pockets and the details on the boots. I also scrape away any cooling lines I can find in the plastic. One or two little gaps needed to be filled in with a drop of superglue.

As with the figure there wasn`t a lot of work needed on the tripod either. Being a very fragile piece I had to be careful removing the mould lines. For some extra detail I added metal loops and carrying slings from an Eduard PE fret. In the background of the photo is a wooden crate so I scratchbuild a similar one from wooden bits.

It is disturbing to look at the old photo and the large pile of spent casings. It really tells a story of horrific fighting and its difficult to imagine what the guys at the front had to go through. Spending hours and hours cutting tiny lenghts of wire certainly can`t compare.

After searching online for rods or wires with the correct dimensions I found the solution in my model room. I stripped the isolation of an old wall lamp and the wires inside had the perfect dimension, and as said, many evenings I did nothing but cutting tiny lenghts until I had enough. I made the main body of the pile from cigarette paper and PVA glue which I started to cover with the ammo casings. From brass rod I cut some spare barrels and added it to the pile.

As I always do I start by coating the figure in black. When this is dry I inspect it for any missed gaps or mould lines. From a drop of Vallejos German field grey (830) and a drop of Extra Dark Green (896) I got a nice shade for the uniform jacket.

I wanted a slightly different shade for the pants so I mixed 1:1 German Field Grey (830) and Military Green (975) for this. I adjusted the base colors with German cam.Black Brown (822) and Green Grey (886) for the shading and highlighting.

From some Archer Transfers sheets I added the uniform insignias, sun wheel patch on the collar,eagle to the left upper arm and on the lower left arm the norwegian national shield and "Norge" arm stripe showing it to be a volunteer in 23.regiment Norge/11.Divison Nordland. I paint all the buttons black and give them a metal sheen with a graphite pencil. Before I start painting the flesh I give the figure a dark pin wash to all the seams and around the buttons.

A 1:1 mix of sunny skintone (845) and Basic skintone (815) made a good basecolor for the face and hands. Adding a few drops of white, and thinning the mix with water gave a lighter color and was glazed on as a highlight. Still using the same mix I added 2-3 drops of Flat Brown (984) and a drop Vermillion Red (909) to get a color I could use for the lips. Last I added a few drops purple and thinned it some more to add around the eyes and on the eyelids. I did this to try to give him the tired "been awake too many hours" look. To complete the skin painting I added shadows by giving the parts several brown washes

using Sin Filters.

Painting ss camo is always a challenge, so I wanted a simple pattern and found a reference pic to work from. I mixed a basecolor from Vallejos German Camo Pale Brown (825) and Flat Brown (984) in a 6+1 drop ratio. This dried quickly and I enhanced the seam lines with a dark wash. I followed up by adding some blotches of a dark green (military green 975 + black 950: 2+1) and then some blotches of a medium green (military green 975). The last color is a light green which I try to place inside the medium green blotches leaving a fine outline of the medium green. (Light green: sunny skintone845 + ss cam

bright green 833 + military Green 975 : 2+3+1).

Now the colors look very sharp and bright, but is quickly toned down with a dark wash followed by some light dusting with pigments.

The ammo boxes and spare barrel containers were painted in different green shades trying to keep subtle variations to them. I added a "2" decal to one box and a yellow stripe to another before I added wear and tear, drybrushing on some aluminium color from an old humbrol can.

I used paints from the Lifecolor range for the tripod, a random mix of Gelbbraun (ua201) Sandgrau (ua202) and Grunbraun (ua203) all found in the German WW2 Tanks Set 1. For paint chipping I used a very fine brush and Sandgrau(ua202) and vallejos Germ cam Black Brown (822) and a little graphite here and there to complete it.

I painted the mg42 by base coloring it with Andrea Color 2nd Shadow from the Black Paint set, followed by rubbing grafite powder to the metal parts. Rotbraun (ua205) was a suiting color for the stock and grip and I gave the whole thing a few dark washes with filters from Mig.

Before I could tackle the ammo pile I made a brown mix from Mig pigments and water and painted the groundwork. This stuff dried pretty fast so I went over the spent ammo with some Humrol enamel #16 and Vallejos Brass (801), keeping the pile from looking to monotone. As this cured it was still very shiny so I toned it down by brushing on a thin layer Humbrol Matt #49 and a few dark washes.

As a last step I took a drill and went to work on the "enemy" side of the log wall. I wanted it to look battle ridden and also added a chunk of shrapnel which I made from torn up lead foil. Before I tidied up the black frame I gave the logs and groundwork a dark brown wash to blend it all together.

Having completed this project that's been haunting my "want to build" list for years I can only say it was fun and its a very nice feeling looking at it in the display cabinet. I think what kept me from doing this build was the ammo pile, but the sore fingers from cutting all those little shells is long forgotten. Now it is time to clean the workbench and dive into a new project.

I brought this diorama and another one with me to Estonia and donated them to the museum in Sinimäed.

Happy modelling fellow geeks.